Tuesday, October 16, 2012

Holy Grail - A Dick Allen frame........

Ok, I really don't know where to start on this, but we've fallen into what I'm 99% sure is an original Dick Allen-built frame. I'm still trying to fill in some holes, and I'm still not sure I have the whole story here, so you'll have to bear with me, and I'll be as accurate as I can in telling the story. Follow along.....
Is this frame light? Does Pinocchio have wooden yarbles? Part-timer Steve and I can both do arm curls with this frame!

About 3 years ago, I ran into Bill Mize at the 1/2 mile flat track races in Sturgis. We hadn't seen each other in a long time, so we spent a good deal of  time catching up. In the course of conversation, Bill was talking of  selling 2 or 3 of his choppers, and thinning the heard down to just one, and possibly selling some of his parts stash. Offhandedly Bill said "Hey, Rich, I have something you might really be interested in....a Dick Allen frame. Well, I'm pretty sure it one of Dick's frames, but I can't say for sure, I can't prove it. But, (El Forastero) Moose says it is, that's who I got it from". Well, that's all I had to hear. I told Bill if he did want to sell it, to give me first crack at it, and he agreed.
Profile shot of the frame. It has about 2" of stretch in the rear section, and the front downtubes are about the same length   as stock are. The tubing is 1" dia., with the backbone at 1 1/2" dia. We're positive it's chrome moly (see above).

So, about another year went by, and I hadn't heard from Bill, so I gave him a call, and yes, he still had the frame. I told him that I still wanted it, and Bill assured me any time I wanted to buy it, it was mine. He said Moose had no qualms about him selling it to me, as long as it didn't wind up in Japan, and I built something with it.

Fast forward to this Summer, and Part-timer Steve and I were talking about Steve wanting to build another bike. I said "You know what would be cool? If you built a bike with that Dick Allen frame that Bill Mize has." Steve told me to call Bill, which I did, and we told him we'd take the frame, if he was still going to sell it. Bill agreed, and he and Steve worked out a price. I'm not going to tell you what Steve gave for it, but it was a good price....a very, very good price.
Stamped under the front motor mount "003". 003 of what - the 3rd frame Dick built? The 3rd of 3 frames in this style? Are there 2 more frames like this out there somewhere? Questions, questions......

Here's what we know, and I hope I've got this story right, because part of this was relayed to me by Steve, and part is what Bill has told me in the past - Bill got it from Moose. Moose had a Shovel in this frame, and he had it on the road for a while in the way distant past. Moose didn't like the way it rode - "Too flexy..." Moose said. But, then again, Moose is a pretty big guy. Moose said he got the frame from Crazy Frank - yes - the Crazy Frank of Crazy Frank Fenders. But, Moose says he can't remember when he got it from Frank. Crazy Frank said he got the frame from Dick Allen, and that Dick built it. Right there, on the word of those two men, I'd say Dick built it. Bill also told Steve that Tator Gilmore was pretty positive Dick built it as well.
Shot of the front neck section, and unusual top motor mount. The diagonal frame braces are 3/4" dia., and the rake on the neck is 38 degrees.
I purloined (fancy way of saying I stole) this photograph from Chris Kallas' MC Art blog. It's a photograph of Bruce Parrish, prepping Dick Allen's Blueprint frame. You can read Chris' original blog post here:

Dick was going to build rigid frames, and it was called, according to what Chris put down, the Blueprint Bike, because it was painted blue, and it was the model of frames to come. See if you don't agree with me on some of the features of the frame we have, and the Blueprint frame.......
First, I zoomed in on the axle plates. I know the axle plates are pointed, but look at the location/shape of the brake backing plate stud slot, the shape of the axle slots, and the way the back legs attach to the plates........

Now, look at the location of this backing plate anchor slot, and the shape of the axle slots - same "H" shape to the slots, and same location of the backing plate slot. Also notice that the frame rails where they attach to the axle plates are "swedged" to them in the same style, and the plates are welded in the same way as the Blueprint frame is. Moose also said that Dick didn't duplicate the overall shape of the axle plates on the frames he built, they were all cut in different shapes.
Ok, now look at the front motor mount, the plates for the forward controls, and the shape of the engine and transmission mounts on the Blueprint frame........
The top plate shape on the frame we have is very similar, and the holes for the front engine mounting bolts aren't 3/8" holes drilled through, they're tapped into the plate........
......and check out the shape of the forward control mounts, and the style of boxing that was used on both this frame, and the Blueprint frame. They are virtually identical in shape and construction.

Now, if that wasn't enough for everybody, I forwarded some more photos on to Joe Hurst, and asked for his opinion. Joe wrote back that what we have here is most likely a Dick Allen frame. Joe went into some construction details for me that Dick used on the frames he built, and some of the work on frames that Dick did for Joe and others, and the fact that it was a cro-mo frame, and it had the 1 1/2"-2" rear frame stretch that Dick liked to do. Joe was pretty sure that we do, indeed have an unusually rare Dick Allen-built frame. Joe Hurst's opinion was just the cherry on top of the sundae for me!

I'm still digging, and I'm still trying to find all I can on this frame. Whatever I turn on this, I'll pass along to everybody as I can. Feel free to Email me with ANYTHING pertaining to this frame PLEASE!

Is this frame for sale? FUCK NO! Don't even ask! This is going back on the road, right where it belongs. That's what Dick built this frame for, and that's what's going to happen. We already have a few lines out on a Dick Allen springer, and a set of Dick's 12 spoke American wheels. I think Dick Allen will be pretty proud when he sees this bike finished. We're gonna try and get as close as we possibly can to a bike Dick might have built with this frame.
FINIS.....for now......

6 comments:

WhitelinePsycho said...

Amazing detective work mate, cro-mo must've been just as unusual then as now for chopper frames. I knew sweet FA about him until Jeff at COC gave me a lead . . . bloke was clearly a genius ahead of his time, I guess making his final years all the more lamentable for all concerned. Look forward to seeing this particular Phoenix flap its way free of the ashes, cheers muchly Rich, livin and learnin day by day.

Bacon said...

cool, Bill had told me about this frame. glad you got it, it's in good hands

Chris K said...

Nice work Rich. It's cool how you were able to zoom in on Bruce's photos for comparison. His photo is strong visual evidence of it's orgins. Thank goodness Bruce documented some of the events at Dick's shop.

Irish Rich said...

We are very fortunate that Bruce took those photos. Very fortunate indeed.

It's like I tell everybody, we just didn't travel around with cameras, or take any pictures. The only people taking pictures then were tourists, newsmen, and cops. it wasn't like today, where somebody whips out their cell phone, and 10 min. later the photo is on their social media page.

Rigid Hips Stockholm said...

Amazing story, such a great read.

mindpill said...

nice............as usual.