Near as I can figure, with some rare exceptions, I've used Fab Kevin brake brackets on every bike I've built over the last 11 years. Kevin is one of these extremely rare, talented individuals that you can call on the phone, tell him what you're doing, and have parts that show up a week later that practically install themselves after you unwrap them.
These stainless beauties came yesterday from Kevin. The one on the left is for a Brembo dual piston Ducati 999 rear caliper w/34mm pucks, that's going on the springer for my CFL single downtube bike. It's a full-floating bracket for an 11 1/2" rotor.
The bracket on the right is for the rear of the CFL, and it'll mount a dual piston Nissin rear caliper from a Kawasaki ZX14. I cut the softail-style brake mounting tab off the frame, and the rear caliper will now hang at 6 o'clock. Kevin had to run a special CAD on this one, to work with the 10 1/4" oddball diameter Grimeca rotor that Dick Allen used. All done over the phone with Kevin, while he typed it all into CAD while we spoke!
Perfect parts, and.......perfect hair! You're the Master, and thank you once again for being the key to translating what I have in my head into functioning components.